Navigating to Danapur Junction from Patna Junction by Auto Rickshaw

Traveling from Patna Junction to Danapur Junction by auto rickshaw is a convenient and traditional method for individuals looking to get around. This detailed guide will help you navigate this journey smoothly.

Steps to Reach Danapur Junction from Patna Junction by Auto Rickshaw

To reach Danapur Junction efficiently, follow the steps outlined below:

1. Find an Auto Rickshaw

Upon arrival at Patna Junction, locate the auto rickshaw stand nearby. Expect to find several auto rickshaws waiting for passengers. Make note of the busy streets and intersections to help you pinpoint the auto stand location.

2. Negotiate the Fare

Before getting in the auto rickshaw, it is advisable to negotiate the fare or ask the driver if they have a meter. The distance from Patna Junction to Danapur Junction is approximately 10-12 kilometers, so the fare may vary based on traffic and the time of day. Carrying cash is recommended as some auto rickshaws may not accept digital payments.

3. Route to Danapur Junction

The typical route the driver takes includes the following directions:

Head towards the Ashok Rajpath. Continue on this road until you reach the Danapur area. Follow local signs or ask the driver to take you directly to Danapur Junction.

Note: There may be alternative routes, depending on current traffic conditions.

4. Travel Time

The journey from Patna Junction to Danapur Junction typically takes around 30 to 45 minutes. Traffic conditions can significantly impact this travel time. Always allow extra time during peak hours to ensure a smoother journey.

5. Arrival

Once you arrive at Danapur Junction, ensure you have all your belongings before exiting the auto rickshaw. Verify that the fare is correct and clear before leaving. There are many auto rickshaw drivers operating in the area, so you should have no trouble finding one.

Alternative Methods:

While taking the auto rickshaw directly is the most straightforward method, there are other options available. These include:

Direct Bus:

There is a direct bus service from Patna Junction to Danapur, but it involves a stop at GPO Golambar first. From there, you can take an auto rickshaw directly to Danapur Junction. GPO Golambar is about 200 meters west from Mahavir Mandir. You can walk there easily.

Auto Rickshaw from Local Stand:

Alternatively, board a local auto rickshaw at the Patna Junction auto stand and directly reach Danapur Junction. Some auto rickshaws may wait at the Patna Junction auto stand for passengers heading to Danapur Junction.

Travel by Bus:

Sit at the bus stand outside Patna Junction. You can board an auto rickshaw from here to take you to Danapur, but you can also find many auto rickshaw drivers outside who can take you directly.

These methods provide a range of options based on your preference and convenience. Whether you choose the direct auto rickshaw or the bus route, ensure you are well-informed about the routes and the approximate travel time for a smoother journey.